Apc smart-ups sc 450va manual

Topology Line interactive. Waveform type Stepped approximation to a sinewave. Transfer Time 4 ms typical : 8 ms maximum. Input voltage range for main operations - Adjustable, - V. Battery type Lead-acid battery.

Typical recharge time 5hour s. Nominal Battery Voltage 12 V. Replacement Battery RBC Expected Battery Life years 3 - 5. RBC Quantity 1. Battery Charge Power Watts 22 Watts. Runtime View Runtime Graph. Control panel LED status display with on line : on battery : replace battery and overload indicators.

Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm. Surge Protection and Filtering. Surge energy rating Joules. Filtering Full time multi-pole noise filtering : 0. Maximum Height 44MM, 4. Maximum Width MM, Maximum Depth MM, Net Weight Shipping weight Shipping Height MM, Run time for load. Enter the total load power draw of all devices to be protected by the UPS here. Based on the value entered we will estimate the run time that you will have during a total power outage.

Adding run time increases availability by allowing the system to operate through longer outages without shutting down. Capacity Used. The maximum percentage of UPS capacity used to support your specified load. Rack Height 2U. Nominal Output Voltage V. Nominal Input Voltage V. Cord Length 6ft 1. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Simplifies installation and UPS maintenance while minimizing space requirements.

Allows for standardization on one product for use in different environments. Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Network manageable Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

Serial connectivity Provides management of the UPS via a serial port. Audible alarms Provides notification of changing utility power and UPS conditions. LED status indicators Quickly understand unit and power status with visual indicators. Marketing features. Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected PFC power supplies.

Save time with easy and convenient remote accessibility Network manageable via serial, USB or optional ethernet. Avoids costly power problems by keeping your IT equipment and data safe and available Network grade power conditioning protects from damaging surges and disruptive noise.

Reliable battery back-up capacity to power through outages or gracefully shutdown systems. Automatic self-test eases maintenance requirements by eliminating the need for periodic manual self-tests. During the self-test, the UPS briefly operates the loads on-battery.

If the UPS passes the self-test, it returns to on-line operation. The loads are not affected by a failed test. Recharge the battery overnight and perform the self-test again. If the replace battery LED is still on, replace the battery using the Replacing the Battery procedure.

During on-battery operation, the on-battery LED illuminates and the UPS sounds an audible alarm consisting of four beeps every 30 seconds. The alarm stops when the UPS returns to on-line operation. Low Battery When the UPS is operating on-battery and the energy reserve of the battery runs low, the UPS beeps continuously until the UPS shuts down from battery exhaustion or returns to on-line operation.

When all five LEDs light, the battery is fully charged. Shutdown Mode If there is no utility power present, a host system connected to the computer interface port can command the UPS to shut down.

This is normally done to preserve battery capacity after a controlled shutdown of the protected system. In shutdown mode the UPS stops supplying power to the load, waiting for the return of utility power. The UPS scrolls the front panel indicators sequentially in shutdown mode. When line power is restored, the UPS returns to on-line operation. Avoids costly power problems by keeping your IT equipment and data safe and available Network grade power conditioning protects from damaging surges and disruptive noise.

Reliable battery back-up capacity to power through outages or gracefully shutdown systems. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging.

Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Smarter productivity with ability to tailor to your specific application needs Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.

Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.

Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Disconnected battery notification Warns when a battery is not available to provide backup power.

Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.